Planned is a technical description on an digital moon - clock with analogously Display. Designed und build by Gerhard Berkefeld-Drucks
Description of "Mondphase 2"
The time of full moon to full moon totals 29,6 days. To present a symmetrical display were chosen 28 days for the advertisement. In this form the "moonday" are 25,333 hours, that corresponds to 91200 seconds.
The electronics of the clock is marked with 50Hz. The frequency becomes through 4,56 Million divided, and this impulse given to the memory, contains the displayinformation. The tact can be entered also manually, is required also for the programming. (See picture 1)
Um einen Impuls zu erzeugen, der den Speicheinhalt einen Tag weiterschiebt, müssen die Sensoren 1+2 verbunden werden (Set), anschließend müssen die Sensoren 2+3 kurz verbunden werden, damit die von der Uhr erzeugten Impulse nicht gesperrt werden. Mit dem I-0 Taster kann eine Information in den Speicher eingelesen werden. Diese Information wird vor dem Speicher auf dem Tag 28, das ist die rechte LED-Zeile, angezeigt. Nach dem SET Impuls befindet sich diese Information auf dem ersten Speicherplatz. Wird der Taster nicht betätigt, wird der Speicherinhalt von dem letzten auf den ersten Platz übernommen.
So that the clock indicates full moon, 14 I - impulses and 14 0 - Impulse must be entered. This should be examined through a complete run.
At full moon all 14 LED should light now lines, at Newmoon have extinguished them.
So that at power outage the clock does not lose their content, can be soldered on the reverse an accumulator. The accumulator must have by 2,4 volts and is loaded automatically.
Since the clock disposes of a displaymultiplexer, it requires only approx. 40mA. Acuu operation is not still possible. The accumulator serves only the storage.
1 phase of the moon = 29,52 days = 708,72 hours = 42523,2 minutes = 2551392 seconds
1 Monday = 25.28 hours (25:17 h)
Designed und build by Gerhard Berkefeld-Drucks 1989/1990
Digital Moonclock
So that at power outage the clock does not lose their content, can be soldered on the reverse an accumulator. The accumulator must have by 2,4 volts and is loaded automatically.
Since the clock disposes of a displaymultiplexer, it requires only approx. 40mA. Acuu operation is not still possible. The accumulator serves only the storage.